Fully Automatic Centering Plunge Facing Machine
Model - CFAM-500-1000
This machine is very useful in the after-cutting processes of rods. The centering plunge facing machine is used to make the cut rod smooth & equal as these rods when cut into pieces are not smooth & equal.
| Admitted work length|
with Single vice min
with Double vice min
with Double vice max.
| 40 mm|
|Min. job dia. clamped in vice||15 mm|
|Max. job dia. clamped in vice||125 mm|
|Job Clamping system||Self Centering vice by Hydraulic motor force 2000 kg.|
|Rapid Travel Speed||4200 mm/min|
|Spindle speeds||750, 1000 RPM|
|Max. Stroke of Slide||50 mm|
|Slide Feeding||Infinitely variable with hydraulic.|
|Max. Plunge face Diameter||63 mm|
|Centre Drill Sizes||BSS3 TO BSS6/as per ISI|
|Total Machine Power|
• Spindle Power
• Hydraulic Motor Power
|Coolant Motor||0.15 H.P/40 lpm|
|Overall Size LxWxH||2000 / 1300 / 1600|
|Machine Weight||1250 Kgs.|
Head Stock :
Two Spindles are supporated by two taper roller bearigs at both sides. Both head stock are slide feed by Hydraulic. One head stock permanently fixed & other is adujustable to accommodate different job length. Drive is by timing belt. Change of speeds is changing timing pulley.
Tool Holders :
Facing tools are indexable insert type. Centre drill holders is used to hold and adjust centre drill. Depending on application, Chamfering, O.D. Turning, tools can be supplied.
The job is clamped by to self centering vice assy. (LH/RH scres with G.M.T nut / V-flat Jaws.) The vice screw are rotated by hydraulic motor.
Machine Bed and Rack Pinion system :
The box and cross ribbed bed with toughened guide ways ensures rigidity of machine bed. Rack and pinion systems is given to adjust vice assy, adjustable headstock to required length.